Product details
Main feature of longitudinal seam welding machine
1. The welding torch moves up and down pneumatically, the workpiece is fixed and the welding seam is flat. Welding torch travels longitudinally.
2. The workpiece is positioned, aligned, and pressed by pneumatic keys to ensure that the weld position does not deviate.
3. Welding torch can be adjusted up and down, left and right, front and back, and angle to meet welding requirements..
4. PLC is used to control the whole machine running and AC frequency conversion speed regulation (or AC servo motor) to ensure the reliability of the equipment..
5. Copper gasket and forming groove to ensure back side forming; with water cooling and back side shield gas system
6. Welding specification can be preset, stored and invoked. It is easy to change parameters and state transition through touch screen interface.
Main parameters of longitudinal seam welding machine
Applicable diameter |
200mm-900mm |
Applicable length |
500mm-2000mm |
Material thickness |
0.6mm-4mm |
Material |
mild steel, stainless steel, aluminum |
Welding mode available |
TIG, MIG |
Control system |
PLC and touch screen |
Welding speed |
100-700mm/min |
Welding torch left-right direction adjust |
100mm |
Welding torch lifting stroke |
100mm |
Machine working voltage |
380v 3phase 50hz |
Equipment composition
The machine is composed of frame, workpiece positioning and aligning mechanism, workpiece pressing mechanism, welding torch longitudinal walking mechanism, welding torch lifting and adjusting mechanism, cooling system, welding power supply, pneumatic system and electrical control system.
1.Machine frame
It is welded by square pipe and steel sheet metal. The lower part of the frame is a worktable. The workpiece positioning and aligning mechanism and the workpiece pressing mechanism are installed. The upper part of the frame is a gantry beam, and the longitudinal walking mechanism of the welding torch is installed.
2.Workpiece positioning and aligning mechanism
Use pneumatic block to align. When one side of the workpiece is pushed against the block, the pneumatic block rises and push the other side of the workpiece to realize the workpiece alignment and positioning.
3.Workpiece pressing mechanism
The mandrel and pneumatic keyboard are used for positioning and pressing the workpiece. The pressure is uniform and the pressing effect is good. Welding seam and clamping area should be illuminated without damaging the operator's eyes. The clamp key is smooth. Clamping does not have any technical requirements. Clamping avoids material dislocation of any thickness. Clamping force can be controlled and adjusted. One side of the clamping position can be clamped directly, and the other side can achieve pre-clamping to meet weld alignment. The use of mechanical block to avoid end misalignment can save the sliding time of short pipes by translating the mechanical block. The width of clamping keys is not more than 80 mm. There is water-cooling system and back side gas shielding system in the mandrel
4.Welding torch longitudinal walking mechanism
It is composed of AC variable frequency motor, reducer, gear rack transmission, etc. The motor through AC frequency converter driver, drives the welding torch to move. The control precision is high, the speed range is wide, the speed change is uniform and the force distance is stable. Welding torch is guided by guide rail with high precision. Improve production efficiency on the premise of guaranteeing welding quality
5. Welding torch clamping and adjusting mechanism
Fixed on the moving bracket of the cross beam guide rail, the cylinder drives the movement up and down to realize the conversion between the preparation and welding status. The welding torch rises and falls with the cylinder. Pneumatic lifting is guided by linear bearings and guide pillars with high positioning accuracy. The welding torch can be adjusted up and down, left and right, front and back, and angle respectively. Welding torch fine-tuning adopts swallow tail form, adopts rod adjustment, accurate adjustment, high positioning accuracy, and can be tightened after adjustment.
http://www.haoyuweld.com/
